Please wait while the page loads...

2016 Nissan Murano Check Engine Light Flashing

Although there are countless viable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable current causes including something as simple as a loose gas cap. Extra current reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Nissan Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Nissan issue was fixed.

Every 2016 Nissan Murano was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its vital systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is amiss nor what to do about it. That’s where we come in; Nalley Nissan of Cumming provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service licensed.

Will the check engine light reset itself?

The check engine light on your 2016 Nissan Murano will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going acceptable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Nissan Murano light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to Nalley Nissan of Cumming so the light and code can be double-checked and reset.

2016 Nissan Murano Check Engine Light

A flashing light indicates that the problem is strict and if not taken care of immediately may result in major damage to the vehicle. If the check engine light in your 2016 Nissan Murano starts flashing, that means that the problem needs sudden attention and your Nissan should be brought in immediately. This blinking light frequently expresses a draconian engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can suddenly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a excessively expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Nalley Nissan of Cumming rapidly by calling 7706290287.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2016 Nissan Murano is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot added ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2016 Nissan Murano. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of many things. It can be as easy as your gas cap being loose or as treacherous as engine knocking. If your check engine light is on in your 2016 Nissan Murano, contact Nalley Nissan of Cumming. Our Nissan service department can help you find out what code is turning your check engine light on or inspect why your check engine light is flashing. Contact Nalley Nissan of Cumming today!

What could cause the check engine light to come on in a 2016 Nissan Murano?

When your check engine light comes on, this could be as familiar as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a critical problem that could cause critical wear and tear to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A feasible glow mostly means something less critical but a twinkling check engine light indicates that your vehicle’s engine is in critical trouble and service is crucial immediately. If your check engine light is twinkling in your 2016 Nissan Murano, we hugely recommend not to drive the vehicle and schedule Nissan service today. Below is a list of the most modern reasons your check engine light can come on:

  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2016 Nissan Murano’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Nissan of Cumming offers a complimentary multi-point inspection with every Nissan service. If you have an issue with your catalytic converter and don't get it serviced, your 2016 Nissan Murano will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause divergent problems from overheating.
  • The battery is scanty or dead. The battery in your 2016 Nissan Murano is every important. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Nissan you drive, but check our contemporary service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, familiar as the O2 sensor, measures the fee of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less competent when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Nissan Murano's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to choose the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
  • Your 2016 Nissan Murano has a vacuum leak. Every Nissan Murano has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, especially if they’re exposed to notable heat or extreme frosty.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Nissan Murano is what determines how much fuel is decisive to run your engine efficiently by measuring the fee of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Nissan Murano is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • One of the most current and plentiful cause is that your 2016 Nissan Murano gas cap is loose, damaged or missing. The gas cap for your 2016 Nissan Murano serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Nissan Murano, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with all aftermarket items. An aftermarket alarm, exhaust or divergent item can wreak havoc on your 2016 Nissan Murano if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even hinder the vehicle from starting. If these issues sound familiar, transport your Murano to Nissan and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing all issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a small bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are decisive for your 2016 Nissan Murano. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.

Check Engine Light Service 2016 Nissan Murano

What do you do when you’re driving along in your Nissan Murano and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Nissan owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the value of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Nissan Murano checked as soon as available. Ignoring that warning could end up causing essential damage to lavish engine components.

When your 2016 Nissan Murano's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is elect for with an computerized analyze tool that is used by our Nissan auto repair mechanics at Nalley Nissan of Cumming. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to elect for the issue and repair it.

2016 Nissan Murano Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard swiftly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Murano. There are hundreds of distinct codes that your check engine light can imply. While that sounds daunting, with a small patience, tackling main diagnostics will give you important knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, discernable and acceptable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Old Battery
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • O2 Sensor
  • Computer output circuit issues

This is why it is alarming for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out suddenly by a certified Nissan mechanic. Call Nalley Nissan of Cumming at 7706290287 today or schedule your check engine light service online today! If the engine light comes on due to a risky concern, you risk damaging your car further by not repairing the issue right away.

How much does it cost to get the engine light checked?

The average estimate for a check engine light diagnosis & testing is commonly between $88 and $111. The handy news, Nalley Nissan of Cumming offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it handy to get the decent code reading and diagnosis.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how several miles you can commute with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Nalley Nissan of Cumming to help opt for if your vehicle is safe to commute in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy appropriately. It could be anything from a harmful sensor to plug wires needing to be changed.

Is it safe to drive your 2016 Nissan Murano with the check engine light on?

If the check engine light is flashing, this means that there is a important issue and it is recommended to service your Nissan Murano urgently. This question is not very pure because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is generally indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more convenient problem. Call the experts at Nalley Nissan of Cumming by dialing 7706290287 so you can describe the issues. Or lessen your speed and bring your 2016 Nissan to our certified mechanics as soon as available.