Please wait while the page loads...

2014 Nissan Murano Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also accepted as the OBD (on-board computer diagnostic system) in your Murano. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling needed diagnostics will give you conducive knowledge about your vehicle and will also allow that Check Engine Light to do what it is absolutely supposed to do: be your guide. Unfortunately, clear and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Transmission issues
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • O2 Sensor
  • Ignition system faults
  • Emissions controls issues

This is why it is amazing for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Nissan of Cumming at 7706290287 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out promptly by a certified Nissan mechanic. If the engine light comes on due to a noteworthy concern, you risk damaging your car further by not repairing the issue right away.

2014 Nissan Murano Check Engine Light

If the check engine light in your 2014 Nissan Murano starts flashing, that means that the problem needs immediate attention and your Nissan should be brought in today. A flashing light indicates that the problem is active and if not taken care of today may result in major damage to the vehicle. This flashing light usually hints a important engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is viable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A damaging, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Nalley Nissan of Cumming expeditiously by calling 7706290287.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more applicable failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it vital to get the lawful code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is generally between $88 and $111. The vital news, Nalley Nissan of Cumming offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light.

Check Engine Light Service 2014 Nissan Murano

What do you do when you’re driving along in your Nissan Murano and quickly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Nissan owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Nissan Murano checked as soon as accessible. Ignoring that warning could end up causing first-rate break to costly engine components.

When your 2014 Nissan Murano's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t humane, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Nissan auto repair mechanics at Nalley Nissan of Cumming. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to mean the issue and repair it.

What could cause the check engine light to come on in a 2014 Nissan Murano?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow commonly means something less perilous but a twinkling check engine light indicates that your vehicle’s engine is in perilous trouble and service is essential quickly. If your check engine light is twinkling in your 2014 Nissan Murano, we highly recommend not to travel to work the vehicle and schedule Nissan service straightaway. Below is a list of the most ongoing reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Nissan Murano is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Nissan Murano is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer realistic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause break to your catalytic converter and your 2014 Nissan Murano's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to illustrate the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • One of the most common and many cause is that your 2014 Nissan Murano gas cap is loose, damaged or missing. The gas cap for your 2014 Nissan Murano serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on today after you put gas in your 2014 Nissan Murano, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is low or dead. The battery in your 2014 Nissan Murano is every vital. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The value of a new one depends on the type of Nissan you drive, but check our contemporary service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or back-up item can wreak havoc on your 2014 Nissan Murano if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound keen, bring your Murano to Nissan and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, tremendously aftermarket parts and accessories, or using OEM parts first place might value a little bit more but could save you money from having to get poor work and break caused by poor installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Nissan Murano’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Nalley Nissan of Cumming offers a complimentary multi-point inspection with every Nissan service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Nissan Murano will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause back-up problems from overheating.
  • Your 2014 Nissan Murano has a vacuum leak. Every Nissan Murano has a vacuum system that performs a enormous variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, tremendously if they’re exposed to exciting heat or extreme pleasant.
  • New Spark Plugs or Plug Wires are essential for your 2014 Nissan Murano. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or break to ignition coils and O2 sensors, dominant to more expensive repairs.

Is it safe to drive your 2014 Nissan Murano with the check engine light on?

If the check engine light is shining, this means that there is a noteworthy issue and it is recommended to service your Nissan Murano promptly. This question is not very uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be active to drive. This is commonly indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more astonishing problem. Call the experts at Nalley Nissan of Cumming by dialing 7706290287 so you can describe the issues. Or reduce your speed and bring your 2014 Nissan to our certified mechanics as soon as agreeable.

Will the check engine light reset itself?

The check engine light on your 2014 Nissan Murano will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Nissan Murano light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Nissan of Cumming so the light and code can be double-checked and reset.

2014 Nissan Murano Check Engine Light Flashing

Although there are many potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many prevailing causes including something as simple as a loose gas cap. Definitive prevailing reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Nissan Certified Technicians and the certified service protocol to isolate the root problem and repair it as paramount to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Nissan issue was fixed.

Every 2014 Nissan Murano was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the high-tech control unit. If the high-tech control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is awry nor what to do about it. That’s where we come in; Nalley Nissan of Cumming provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2014 Nissan Murano is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in various definitive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2014 Nissan Murano. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of diverse things. It can be as effortless as your gas cap being loose or as compelling as engine knocking. If your check engine light is on in your 2014 Nissan Murano, contact Nalley Nissan of Cumming. Our Nissan service department can aid you find out what code is turning your check engine light on or scan why your check engine light is flashing. Contact Nalley Nissan of Cumming today!

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Nalley Nissan of Cumming to help choose if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a detrimental sensor to plug wires needing to be changed. The safest bet is to decipher the code and then plan your strategy appropriately.